Bucktown belts in brown Horween® Illini Latigo coiled on the workshop bench, with teardrop holes and buckles

How We Make the Bucktown Belt

I wanted a belt that was more refined but still tough enough for workwear, so we made the Bucktown belt. We used our leather knowledge to select the perfect full grain, vegetable retanned Horween® leather, for a classic appearance, tough as nails durability, and for comfort from the hot-stuffed wax blend Horween® uses.

Here is how we make it in our Chicago workshop.

Bucktown belts in brown Horween® Illini Latigo coiled on the workshop bench, with teardrop holes and buckles

Shop the Bucktown Belt

The leather: Horween® Illini Latigo

Horween® Illini Latigo is a full grain leather, tanned in Chicago. It is combination-tanned and vegetable retanned, then hot-stuffed with waxes and oils. Those waxes and oils warm with your body, and the strap softens as the day goes on. It develops patina with wear.

We use it at 9 oz, and we cut the Bucktown 1.25″ wide, so one belt can go with raw denim or with chinos. You can read more about the leathers we use on our Horween® leather page, and in our guide to Horween® leathers.

Close-up of teardrop holes on coiled Bucktown belts in brown Horween® Illini Latigo

Cut to length

We measure each strap and cut it to length on the bench, with a square and a rotary cutter.

Cutting a leather belt strap to length with a rotary cutter and a tape measure on the Ashland bench

The steel forged die

The tip of the belt and the seven teardrop holes are cut together, with a steel forged die. The teardrop shape lets the buckle pin sit flatter against the strap.

Steel forged die for the Bucktown belt, with seven teardrop hole punches and a tip cutter Placing a leather belt strap into the steel forged die before cutting the tip and teardrop holes Leather belt strap after the steel forged die, showing the teardrop holes beside the press

Hand beveling the edges

We bevel the edges by hand, easing the corners of the cut strap.

Hand beveling the edge of a Bucktown belt strap on the workshop bench Close-up of hand beveling the edge of a brown Horween® Illini Latigo belt strap

Hand staining the edges

We stain the edges by hand with a dauber, so the cut edge takes on the color of the strap.

Hand staining the edge of a Bucktown belt with a dauber Hand staining the edge of a brown Horween® Illini Latigo Bucktown belt with a dauber

We also burnish the edges.

Bonded nylon tonal stitching

We sew a tonal border along the strap with bonded nylon.

Sewing the tonal border on a leather belt strap at the machine in the Ashland Chicago workshop Sewing a tonal border stitch along a black leather belt strap, with teardrop holes visible under the machine

Tanner's Blend finish

We finish the belt with Tanner's Blend. The buckle is solid brass with a polished nickel finish.

Watch how it's made

How to size the Bucktown belt

We size to the middle hole. Take your jean size and add 2″, or measure from the buckle to the hole you use most. The leather can stretch up to about 1″, so for a snug fit you can size down an inch. We make even sizes only, so if you are between sizes, size up. See the belt size guide.

FAQ

What is Horween® Illini Latigo?

Horween® Illini Latigo is a full grain leather, combination-tanned and vegetable retanned, and hot-stuffed with waxes and oils. On the Bucktown belt we use it at 9 oz. The oils warm with your body, so the strap gets more comfortable through the day.

How do I size a Bucktown belt?

We size to the middle hole. Take your jean size and add 2″, or measure a belt you already wear from the buckle to the hole you use most. If you are between even sizes, size up. The full method is on our belt size guide.

How should I care for a Bucktown belt?

When the leather looks dry, condition it lightly with Tanner's Blend. Wipe it with a soft cloth, and if it gets wet, let it air dry away from direct heat. Our guide to how to care for Horween® leather has the full method.

Why are the holes teardrop shaped?

The seven holes are cut in a teardrop shape so the buckle pin sits flatter against the strap. We cut the tip and the holes together with a steel forged die.

Where is the Bucktown belt made?

The Bucktown belt is handcrafted in Chicago from Horween® Illini Latigo, which is also tanned in Chicago. It is Guaranteed for Life.

Bucktown belts in brown Horween® Illini Latigo coiled on the workshop bench, with teardrop holes and buckles

Shop the Bucktown Belt

Handcrafted in Chicago. Guaranteed for Life.

Shop the Bucktown belt, or browse all of our leather belts. For more from the tannery, see a behind-the-scenes look at Horween®.

Back to blog